www.divapc.com/forum


Update Key Step:

1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3) Turn on the receiver and press "POWER" key to make it standby, the LED dot will blink.
4) Run Upgrade WaveV1.01.exe on your PC,Slect the <Download Key>,press <Open> and select the bin   file,then click <Start>,upgrade will begin.
5) When finish, the LED will display "-End"


How to update receiver to receiver?

1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect the master receiver and the slave receiver with twisted RS-232C cable.
3) Turn on the master receiver and press "POWER" key to make it standby, the LED dot will blink.
4) Turn on the slave receiver,then the LED of master receiver will display 'H'.
5) Input digit number on master receiver to update different parts:
	 111---- Update software.
	 222---- Update data.
	 333---- Update data,then software.
	 444---- All flash except boot loader. 	
6) When finish, the LED  will display "-End"


Patch key:
  1) Key menu: Main Menu + 0
  2) Current Key: INFO+0
  3) All ECM List: INFO+1


www.divapc.com/forum LDER 1